Epoxy Coatings and Epoxy Resin Aggregate Seamless Mortar Coatings.
- Vehicular-grade anti-slip protection – even when wet!
- Give your floors the ultimate in anti-slip strength, endurance and chemical resistance!
- Anti-slip protection yet gentle to bare feet.
- Add safety traction to almost any traffic surface with a single coat.
Cold weather applications–with or without heaters.
- Make your standard traffic floor areas safer.
Chemical Resistance Coatings.
- Chemical resistance to concrete floors with the strength of epoxy.
- Install Floors with the ultimate in chemical and acid resistance.
- Seamless, chemical-resistant epoxy coating.
- Protect floors from destructive chemical exposure with an economical three-coat system.
- Build against chemical attack with an extremely durable, 100% solids, thick coat system.
- Provide the ultimate chemical resistance to chemical exposure.
General Traffic Coatings
- High performance, resin based, 100% solid epoxy coatings.
- Urethane epoxy coatings that guard your floor against traffic abrasion.
- High-build, seamless epoxy resin aggregate floors.
- Extend the life of your concrete, wood and metal surfaces.
- Install superior wear protection, general-use, high performance floor coating systems.
- Give your floors a durable water base epoxy finish.
Heavy Traffic Coatings – Extend the life of your concrete floors with epoxy strength.
- Provide flexible, 100% solid epoxy coat for high traffic surfaces.
- Install thick, epoxy coatings for use on spalled and damaged concrete floors.
- Provide durable floor protection against high volume industrial traffic
- Provide durable protection against high volume traffic with aggressive top coats for higher wear life.
- Provide the most versatile protection against high volume industrial traffic with superior chemical resistance.
Patch concrete in cold temperatures!
- Patch and resurface concrete in below freezing temperatures!
- Superior Products
- Patch dangerous potholes permanently.
- Make old, worn stairs new again!
- Repair cracks & spalls in light traffic areas.
Fast, vertical concrete repairs without formwork.
- High-strength epoxy grout and concrete surfaces.
- Single component, polymer-modified, non-sag mortar.
- Polymer-modified, cementitious, leveling and skim coat mortar.
- Repair shallow voids & cracks.
- Give vulnerable floor-wall joints premium chemical resistance.
- Repair old concrete floors with the strength of epoxy.
Specialty Concrete Repair
- Plug running water and seepage instantly!
- Anchor bolts, fence posts & railings
- Repair concrete in extreme high heat temperature areas, that withstand temperatures to 3500°F.
Our Specialty Products
FOREVERTREAD™
- ForeverTread with ArmorSeal1000 HS is a high solids, heavy duty, two-component, catalyzed, polyamide epoxy coating formulated for demanding marine and industrial requirements. This dries rapidly to a tough, high gloss finish with excellent resistance to alkalies, abrasion, corrosion, and chemical attack.
- Chemical Resistant
- Impact Resistant
- Abrasion Resistant
- For industrial, commercial, or marine applications where a heavy duty epoxy coating is required.
- Superior resistance to chemicals, moisture, abrasion, and impact
- Meets ADA requirements for slip resistance for floors
- Excellent resistance to alkalies, dilute acids, spillage of solvents, chemicals, jet fuel, grease, etc.
- Clear finish for interior use only
- Suitable for use in USDA inspected facilities
SPECIFICATIONS
- Volume Solids, mixed: colors – 65% ± 2%
- clear – 61% ± 2%
- Weight Solids, mixed: 74% ± 2%, may vary by color
- VOC (EPA Method 24), mixed, may vary by color:
- Unreduced: <340 g/L; 2.8 lb/gal
- <400 g/L; 3.33 lb/gal
GARONSEAL™
- Waterproofing membrane for below-grade surfaces.
- Allows contraction and expansion over a broad temperature range
- Maintains waterproofing properties under continuous exposure to water
- Bridges hairline cracks
- Garonseal™ WPS is intended for use wherever overflow water must be contained. Forms a seamless, flexible rubber membrane impervious to moisture for both horizontal and vertical surfaces.
- Use to waterproof below grade exterior walls or foundations and basements. Also used for waterproofing inside planter boxes, under shower pans, kitchen, laundry, and bathroom floors.
SPECIFICATIONS
- Coverage: 20 square feet per gallon at 60 mils for one coat
- Set Time: 12 – 16 hrs.
GRIP-COAT™
- Cuts glare, adds color & improves traction on asphalt or concrete surfaces.
- Helps prevent surface glare to increase visibility
- Resists abrasion & scuffing – retains its freshly coated appearance
- Easy squeegee brush application
- Provides excellent protection for multi-use exterior surfaces. Provides coverage of surface, lines and surrounding areas with a colored coating. Textured surface enhances traction. Won’t discolor shoes. Helps prevent skidding when used in stop-and-go traffic areas. Also ideal for heliport, MED-VAC arrival/departure points.
- When applying Grip-Coat™ to concrete surfaces, prime first with Grip-Coat Primer™. For optimum results repair any cracks or voids first use Crack-Fil™ or Flexon™. Complete the job with Stripe-White™ for directionals and line making. Exterior use only.
- Tip: – When using two colors, order 40% of one color for the inside boundary lines, and 60% of the other color for the perimeter. Approximately 100 gallons is necessary to cover one court.
SPECIFICATIONS
- Coverage: 70 – 80 sq. ft. per gallon
- Drying Time: 2 hrs. to touch, 12-24 hrs. normal traffic
WATERSTOP™
- High performance, waterproof, masonry coating.
- Saves time and costly excavation of below grade walls
- Eliminates water and dampness in basements
- Interior use or exterior use
- For above or below grade surfaces, vertical or horizontal
- Base for moisture sensitive coatings
- High durability and impact resistance
- Long lasting, will not shrink or peel
- Apply Waterstop™ CP in one coat by trowel, or multi-brush application to block, brick, concrete or stone.
- Waterstop™ CP will waterproof from the interior wall even under instances of hydrostatic pressure, as well as waterproof from the exterior side of the wall.
SPECIFICATIONS
- Coverage: 42 sq. ft. at 1/8″ troweled, 85 sq. ft. at 1/16″ brush
- Set Time: 12 – 24 hrs. initial set, 5 – 7 days final cure
CRACK-SEAL™
- Versatile crack repair – from hairline cracks to large holes.
- Traffic ready in 30 minutes
- Cures in temperatures down to 20°F
- Excellent chemical resistance
- Very low odor – can be used indoors
- Use Crack-Seal™ to repair hairline cracks or larger. Great for spalled concrete, holes, or uneven concrete slabs. Use Crack-Seal™ to connect broken slabs or to repair moving slabs.
- Crack-Seal™ is compatible with most floor coatings and it’s low odor is suitable for indoor applications.
SPECIFICATIONS
- Coverage: dual pak – 100 ft. of 1/4″ x 1/4″ cracks
- Set Time: 10-20 min.lt. traffic, 1 hr recoat & regular traffic
JOINT GUARD™
- Joint Guard™ pours right into expansion joints – resists cracking, flexes with joint movement.
- Provides durable, flexible epoxy seal – won’t become brittle
- 100% solids formula stands up to steel-wheel traffic & chemical contact
- Just mix & pour into expansion joint for a flexible seal
- Joint Guard™ is pourable, self-priming, self-leveling, non-shrinking and won’t become brittle. Flexes to accommodate moderate expansion joint movement. For interior and exterior use.
- For best results, Joint Guard™ should not be coated or painted over. Brush sides of joint with Garon Prime™ for proper adhesion prior to applying Joint Guard™.
SPECIFICATIONS
- Coverage: 60 – 70 lineal feet at 1/2″ x 1″ per 2 gallons
- Set Time: Light traffic 24 hrs, final cure 7 days
