Our professional preparation and installation can normally be completed within 1 – 3 days, given the size of your job. You can expect to be back on your floor within 1 day for normal foot traffic and up to 4 days for vehicle use. We do offer a fast curing coating system when you absolutely must return to normal use within 24 – 48 hours.
Raleigh Epoxy Floors has installation experience in a large variety resin mortars and epoxys resurfacing mortars, listed below are the epoxy and mortar types that we use and reccomend.
Lo-Mod Adhesive
A 100% solids Lo-Mod Low Viscosity adhesive used as a binder for epoxy mortar systems in patching and grouting applications, as a seal coat for non-skid surfaces outside, and as a primer to insure high bond strength for coatings and patches. This product can be clear or pigmented for an extra cost. Available in normal, fast, and winter cures.
FAST Lo-Mod Adhesive -Fast Cure and COLD Lo-Mod Adhesive Cold Temperature Cure
Chemical Resistant Flooring Resin
A two component, seamless 100% solids epoxy resurfacing system with High Chemical Resistance. It may be applied as a coating, or combined with silica sand or EpoxySystems’ multi-colored quartz aggregate to produce a durable, easy to maintain floor, on both new and old surfaces. Can also be used to glaze Chip Flooring.
Epoxy Mortar Resin – a two-component, 100% solids epoxy resin system. Exceeds the requirements of ASTM C-881-78, Grade II, Classes A, B & C, Types I & III. Recommended for use in dry environments only.
Decorative Stone Overlays
A two component, 100% solids high-mod epoxy adhesive used for bonding stone and other aggregates in all types of flooring applications. Some uses would include patios, pool decks, walkways and other areas where a long wearing and decorative system is desired.
General Purpose Epoxy – a hard set epoxy compound formulated for general use. Products cure at room temperature and is a low viscosity system. This durable, resilient material requires no post curing to achieve permanent bond strength. This product easy to use and solves many difficult bonding, and epoxy mortar problems. Product has the ability to bond to a variety of substrates including cannot dry and hard to dry surfaces.
Epoxy Grout
A moisture insensitive, two-component, 100% solids epoxy resin system manufactured specifically for use in temperatures of 40°F and below. It is recommended for injection or anchor-bolt grouting in the neat state or as a mortar when mixed. Exceeds most requirements of ASTM C-881-90, Types I, Grade 1, Class A.
Pumpable Underwater Mortar – a Pumpable Epoxy Mortar that is a moisture insensitive, two-component, 100% solids epoxy resin. This material is specifically designed for use in marine environments, but can be used in wet or dry strippable form applications and can be pumped or poured into the void created between the existing structure and the Epoxy Systems’ Corrosion Free Jacket. Dewatering is not required.
Epoxy Resin Aggregate Mortar
A 100% solids epoxy resin and specially selected aggregate system. Units are pre-proportioned for ease of mixing and use on the jobsite. It is a flowable, self-leveling grout, with handling and physical characteristics superior to similar grouts. Available in Normal, Fast, and Winter Cures.
Epoxy Resin Mortar
A 100% solids epoxy resin and specially selected aggregate system which produces a flowable, self-leveling grout, with handling and physical characteristics superior to similar grouts. It is designed for floor resurfacing where high strength and short down time are needed. Units are preproportioned for ease of mixing and use on the jobsite.
Epoxy Mortar
Honey Clear Mortar is a multipurpose colored epoxy binder for Mortar Systems. This purpose epoxy resin is characterized as an excellent general purpose material with good clarity and color retention. It is essentially odorless and can therefore be used in occupied areas.
The mortar types listed above have been carefully chosen by Raleigh Epoxy Floors as the best for most applications. This is based on there versatility, durability, and favorable handling properties.
